code

Silence card

However, it was found that the CPU specifications currently used are not very powerful, and there is only PCIe x8 bandwidth in total, and I don't know how many Lanes are used by the above two network cards, x4 can be used, x8 is not good. It's useless, two 10 Gigabit + 1X nvme already occupies all the PCI-e lane bandwidth of the processor, which is already the upper limit.

Currently offline

R86S, can you get on the OCP's 25G network card?

Has anyone been replaced?

To get on the high-speed network card, it is estimated that the core-level processor is certain, and the Pentium Celeron is estimated to be unable to bear it, I wonder if anyone plans to develop higher-level soft routing products.
I don't know much about OpenWRT, ask the gods here, is OpenWRT if you use a relatively new Kernel version, is there basically no problem with driving these network cards, because I have recently seen a lot of people say that the network card of Intel i226 is cold, the driver is more tossed, many routing systems do not support it, do you have to compile the Kernel yourself, which is troublesome.
Posted on 2022-9-15 09:53
Now you can have a 10G network card, but they are all older models, I found that the OCP 2.0 network card also has relatively new chip specifications, such as 10/25G general specifications, I don't know if you can get on the 25G network card?? This thing is a god in the family...
I've seen someone get on the 25G network card.,You can use it.,The speed is not bad.,I ran it with iperf.,The speed is normal in one direction.,Full speed.。

Has anyone been replaced?

In addition, these are server type network cards, and the drivers are generally updated quickly, and the newly released Linux Kernel will bring the drivers of these network cards, because they are not unpopular network cards, and they are supported by manufacturers behind them.

R86S, can you get on the OCP's 25G network card? - Soft routing, x86 system, openwrt (x86), Router OS, etc

To get on the high-speed network card, it is estimated that the core-level processor is certain, and the Pentium Celeron is estimated to be unable to bear it, I wonder if anyone plans to develop higher-level soft routing products.
Paparazzi cards
Posted on 2022-9-15 09:53
I've seen someone get on the 25G network card.,You can use it.,The speed is not bad.,I ran it with iperf.,The speed is normal in one direction.,Full speed.。

R86S, can you get on the OCP's 25G network card? - Soft routing, x86 system, openwrt (x86), Router OS, etc

简体中文繁體中文 English

Make a new post
Soft routing, x86 system, openwrt (x86), router OS, etc
This thing is an artifact for home use, saving a high-speed switch, and the 25G/40G switch is not cheap, and the high-speed network at home is limited to [PC+NAS], so this thing is very good for 2 people, just right.
[Copy link]
Manifestation card
Ad delivery contact QQ68610888

Just the CPU of R86S, you can't bring it, right? Heat dissipation is also a big issue. I think,If you can install it,It's definitely going to work.,The question is,The system you need,Is there a driver?,How about the CPU occupation.。。 You want a more advanced soft routing, at present, there is only a supermicro edge server, this machine, which is also a necessary soft route for high-end players. High-end models, driving 40G network cards, should not be a problem, and it is also a standard pice network card, it is easier to find a suitable and cheap network card, but the machine is expensive, and there are many more that are not limited to volume and power consumption.

detail

Integral

The text is bold

You need

Life is never easier, we just get stronger.

report

Now you can have a 10G network card, but they are all older models, I found that the OCP 2.0 network card also has relatively new chip specifications, such as 10/25G general specifications, I don't know if you can get on the 25G network card??

Posted on 2022-10-26 11:16
Sign up for an account

molisuki

UID：96 This edition Can you download or view without an account? In addition, OCP 2.0 seems to belong to the elimination of the standard, the new is the 3.0 specification size, I don't know the developer or manufacturer of R86S, whether there is a plan to use OCP 3.0 in the future??

Sticky card

code Home

Landlord0
Comments0
oppose 3
IP card0
cite0
Landlord0

Reply0

This edition

Advanced mode
Show all floors
Relatively cheap models,Lenovo P340tiny or above the model,The top cover is fully open,Very conducive to heat dissipation,With i7CPU above i7,With 25G network card or above,It should be a relatively cost-effective product,But this is a desktop-level commercial machine,Use the environment25G network card,It's all demanding,Stability and redundancy have design requirements
Reading mode
Wireless device software related sections
Return to the list
Published on 2022-9-15 00:12

Add a link

There are already a lot of OCP 3.0 network cards, but the price is slightly higher, but compared to the switch, it is still much cheaper.
Use props See details Post a reply You'll need to be logged in to reply to posts
Copyright © 2024 · There are already a lot of OCP 3.0 network cards, but the price is slightly higher, but compared to the switch, it is still much cheaper. · Posted on 2022-11-5 14:47
zjawm Posted on 2022-10-26 11:16